85 mm x 150 mm x 28 mm NACHI NJ 217 cylindrical roller bearings

Basic Static Radial Load Rating Co:49000 N; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating Open/Shielded n1:4800 rpm; Oil Speed Rating n2:5600 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; B:25.00 mm; Basic Dynamic Radial Load Rating C:66300 N; D:130.0000 mm; Accessories:One Shield; Fillet

d:340 mm; B2:39.5 mm; Mass angle ring:7.4 kg; r3,4 min.:5 mm; B1:21 mm; d1 ≈:403 mm;

Mass bearing:0.52 kg; da min.:80 mm; Da max.:100 mm; d:75 mm; d1 ≈:86 mm; Limiting speed:3600 r/min; D1 ≈:93 mm; B:19 mm; Reference speed:2800 r/min; E:97.5 mm;

Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:1020000 N; Grease Speed Rating n1:3100 rpm; D:360.0000 mm; Fillet Radius ra:2.50 mm; d:240.000 mm; B:112.00 mm; Basic Dynamic Radial Load Rating C:572000 N;

Mass bearing unit:8.7 kg; Basic bearing designation:22213 E; N:24 mm; J7:29 mm; End cover:ECY 213; Limiting speed:2700 r/min; P120°:155 kN; S:2.5 mm; da:65 mm; Pa:20 kN;

Sealed Speed Rating n3:8000 rpm; Oil Speed Rating n2:11000 rpm; B:22.20 mm; Grease Speed Rating n1:8000 rpm; Accessories:Shield & Seal & Snap; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14000 N; Basic Dynamic Radial Load Rating C:20800 N; D:52.0000 mm; d:25.000 mm;

Grease Speed Rating Open/Shielded n1:21000 rpm; Fillet Radius ra:0.51 mm; Oil Speed Rating Open/Shielded n2:26000 rpm; D:37.0000 mm; Basic Dynamic Radial Load Rating C:7800 N; B:9.00 mm; Basic Static Radial Load Rating Co:3550 N; d:15.000 mm;

Basic Dynamic Radial Load Rating:4380 lbf; Pin Dia A1:0.2500 in; Dimension L:4.3125 in; Dimension J:0.3125 in; Weight W:1.10 lb; Dimension B:4.1250 in; Dimension S1:0.8750 in; Dimension H:1.0000 in; Dimension C:3.5000 in; Dimension D2:2.6875 in;

Fatigue load limit Pu:0.475 kN; J:121 mm; Recommended tightening torque for grub screw:4 N·m; d:30 mm; Basic dynamic load rating C:19.5 kN; Bearing:YARAG 206; s1:22.2 mm; Recommended diameter for attachment bolts, inch G:0.5 in; N1:14.5 mm; J max.:128 mm;

Preload class A GA:80 N; D2:62.62 mm; db min.:48.2 mm; Static axial stiffness, preload class C:187 N/µm; rb max.:0.3 mm; B:12 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Preload class C GC:320 N; Fatigue load limit Pu:0.38 kN; Calculation factor f2A:1;

B:45 mm; E:160.5 mm; Pu:28.130 kN; b:13 mm; r1s (min):2 mm; d2:75 mm; b1:21.5 mm; F:105 mm; Static (Coa):251 kN; D:190 mm;

D:40.0000 mm; Basic Interchange FAF:203KLL2; Width - Outer Ring B0:12.0 mm; Basic Interchange NDH:88503; Accessories:88000 Two Seals; Fillet Radius ra:0.64 mm; Speed Rating-Single and Double Sealed Grease SDG:12000 rpm; Width - Overall B:16.6 mm; Basic Radial Load Rating-Dynamic DC:9560 N; Basic Int

H:400.05 mm; J min.:549.275 mm; J1:114.3 mm; Pa:59.6 kN; Mass pillow block:208 kg; ba:80.169 mm; A1:190.5 mm; Appropriate attachment bolt size G:1.25 in; P180°:160 kN; L:711.2 mm;

Basic Dynamic Radial Load Rating C:212000 N; Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; D:180.0000 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; d:100.000 mm; Basic Static Radial Load Rating Co:250000 N; B:68.00 mm;

H2:41.275 mm; P180°:42.3 kN; PG:1/8 NPT; N1:19.05 mm; Bearing:1218 K; RG:3/8 NPT; da:82.55 mm; Cap bolt, SAE grade:5; Stabilizing ring:2 x SR-1518; P120°:38.3 kN;