FAG 51240-MP thrust ball bearings

F:27.5 mm; Brand:SNR; Characteristic outer ring frequency, BPF0:3.77 Hz; Fatigue limit load, Cu:4.9 kN; Mass (without HJ ring):0.22 kg; d1:31.3 mm; r1a max:0.6 mm; E:45.5 mm; Da max:45.5 mm; Nlim:17,000 rpm;

Z:70.2 mm; H:105 mm; B:41.2 mm; N:17mm; C:31.85 kN; Recommended tightening torque for set screw:11.5 Nm; Designation of open end cover:SCO209-45; Designation of housing:PH209N-; G:M6x1; L1:62 mm;

Y0:1.7; d2:133.2 mm; Fatigue limit load, Cu:60.2 kN; Radial clearance class:C3; da min:131 mm; Characteristic outer ring frequency, BPF0:8.68 Hz; Y2:2.59; Min operating temperature, Tmin:-40 °C; Nref:2,000 rpm; d:120 mm;

Material Bearing:52100 Bearing Steel; Days to Ship:Same day; Bearing Unit, Type:Diamond Shape Flange; Basic Load Rating Cr (Dynamic)(N):9350; Surface Treatment:Not Provided; Bearing Inner Dia. Shape:Set Screw; Volume Discount:Available; Volume Discount:Available; d:20; Basic Load Rating Cor (Static)

Bore:0.591 Inch | 15 Mill; Maximum Capacity / Filling Slot:No; Weight / LBS:0.037; Nlim (grease):16,000 rpm; rs min:0.3 mm; Rolling Element:Ball Bearing; Product Group:B00308; Brand:NTN; Cage Material:Steel; Category:Single Row Ball Bear;

C0:6.65 kN; H2:41 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; d1:32.4 mm; L:264 mm; B1:43.5 mm; C:12.8 kN; Designation of housing:SP203-205/47-; Designation of bearing:EX203-11G2;

SW:5.56 mm; Recommended tightening torque for set screw:27.1 Nm; B2:30.2 mm; G:7/16-20UNF; S:34.2 mm; C1:12.8 mm; D:150 mm; C0:68 kN; B1:92.1 mm; C:40 mm;

N:36mm; B:100 mm; Weight:39.55 kg; H:140 mm; A1:81 mm; L:490 mm; J:380 mm; H1:50 mm; N1:50 mm; L1:130 mm;

Mass:0.1 kg; Inventory:0.0; d:28 mm; Characteristic inner ring frequency, BPFI:5.89 Hz; Characteristic outer ring frequency, BPF0:4.11 Hz; Brand:NTN; Keyword String:Ball; Category:Single Row Ball Bear; ra max:0.6 mm; da min:32 mm;

A:29.5 mm; N:11,5mm; e:19 mm; J:63.5 mm; G:R1/8"; d:12.7 mm; S:6.5 mm; B1:28.6 mm; C:9.55 kN; d1:27.2 mm;

e:15 mm; Z:22.3 mm; Weight:0.57 kg; T min.:-20 °C; C:12.8 kN; T max.:100 °C; C0:6.65 kN; B:31 mm; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm;

Designation of bearing:EX214G2L3; S:34.1 mm; N:19mm; H3:150; B:68.2 mm; G:M10x1; L:215 mm; A4:38 mm; B1:85.7 mm; A2:68.6 mm;

Holder Surface Treatment:Clear Anodize; Bearing Part Number:606; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):6; Bearing Retained:No; Housing Material:[Aluminum Alloy] Alu; Lateral Width L(mm):34;

Surface Treatment:No; Basic Load Rating, Static Rating(N):36200; Fit:J7; Days to Ship:Quote; Seal:Triple seals; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Bearing Unit, Type:Square flange shape; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron;

Designation of housing:FL208N-; N:16mm; S:19 mm; Recommended tightening torque for set screw:8 Nm; Z:32.8 mm; G:M6x1; C0:18.2 kN; A:36 mm; J:144 mm; C:29.6 kN;